Specification
| Product Name | Air slide Fabric | |
| Material: | Polyester Spun | |
| Lenght (m)：20-100. | Width (m): 0.1-1.6 | |
| Thickness: | 5-8mm. | |
| Breathability: | 2m3/m2 min:600pa-1200pa.<3m3/m2 min:<2000pa | |
| Breaking Strength (N/mm): | Warp Direction≧ 470N/mm , | |
| Weft Direction | ≧ 350N/mm . | |
| Ultimate Temp.( Instant ) | 200 ℃ ( 392 ℉) | |
| Operating Temperature (℃): | Continuous Operation 220 ,Instant Operation 250 . | |
Feature:
The polyester air slide canvas is made of special yarns by special woven techniques. Adequate strength, thickness, tightness and perfect dimensional stability, this product enjoys good fame at home and abroad.
Should you inquire any further questions, please be free to send me a message. I'll reply within 24 hours.
1.Material: 100% Polyster yarn
Tickness: 5-6mm
2.Air permeability:0.4-10KPa at 0.2MPA 2M3/M2 min
3.Temperature resistance :180°C
4. Tensile strength:warp: ≥425 N/mm
5.Resistance force:1.2~1.3Kpa
6.No stretch, no deformation, no delamination, long life time
7.Canvas warp and weft clear, surface clean and smooth, thickness is even, size is stable
8.High temperature resistance and dementional stablity
9.small moisture absorption, low adhesion, antisepsis, mold control, high strength, friction resisting, resistant to impact.
10.Applications: mainly cement inudstry, also for power plant, chemical industry and metallurgy
Air Slide Fabric in cement plant:
An Airslide belt is in the middle of a chute.
Powder material will come into the chute above Airslide belt.
Material will flow to the chute lower side as pneumatic blower down Airslide belt.
That's why we say Airslide belt can move powder material because of the wind power.
And then, the rest wind will go out from the top of the chute.
Through the moving, no parts moved except powder material.
So that it can spare more energy and maintain cost, etc.
